the Professional Series

ABS Replacement

easy 3D printing experience

Buy now!
ABS PLA Replacement with PRO1 – Professional Series

Innofil3D polymer chemists have developed the ABS PLA Replacement with PRO1.
This high-speed engineering thermoplastic that prints as easy as PLA at speeds previously considered unusable and yet it retains far better mechanical properties that exceed printed ABS objects, something that the most demanding users have always had to make a compromise on prior to PRO1.

By varying the print settings for this multi-purpose robust filament, users can home in on optimizing for speed, strength, surface quality or a mix of those qualities beyond performance levels of traditional filaments.

When you find yourself in an environment that requires reliable performance print after print, look no further than to increase your productivity with PRO1.

Efficiency and performance

PRO1 offers professionals a solution that enables them to make functional parts without the hassle of tinkering with settings. It is a fast, strong and impact resistant standard material suitable for all desktop FDM printers. It is a perfect material for prototyping and has been developed to withstand high stress or strain.

PRO1 offers major advantages above ABS and PLA;

– SPEED: Reduce your printing time by 30%-80%, (subject to printer and object limitations)
– STRENGTH: Excels overall beyond printed ABS in mechanical property
– VERSATILITY: One filament that can be tuned towards blazing speed and excellent surface finish
– CONSISTENCY: Truly consistent filament, also between colors and batches, it will perform as expected, every time

PRO1 - Professional Series is available at;






Czech Republic:




United Kingdom:






PRO1 - details

Link to: PRO1 Factsheet

Link to: PRO1 Comparison Sheet

Fast printing Strong settings Aesthetics setting
Print temp 220 °C ± 10 °C 220 °C ± 10 °C 210 °C ± 10 °C
Print speed 120 – 150 mm/s 120 – 150 mm/s ≤ 70 mm/s
Fill density ≥ 20% ≥ 20% (higher = stronger) ≥ 20%
Bed adhesion Clean glass Clean glass Clean glass
Fan speed 100% 100% 100%
Top/bottom thickness 1.2 mm 1.2 mm (thicker = stronger) 1.2 mm (thicker = stronger)
Layer height 0.1 mm ≤ 0.06 mm (smaller = stronger) ≤ 0.1 (smaller = better)
Bed temp 60 °C or non-heated bed with tape/glue 60 °C or non-heated bed with tape/glue 60 °C or non-heated bed with tape/glue