Innofil3D is hiring! We are looking for a Channel Sales Manager!

  • en
    • de
    • fr

Innoflex 40 – Blue – 2.85mm – 500gr

InnoFlex 40, 45 and InnoFlex 60 are flexible 3D printing materials. Filaments come in different colours.

Product details

  • Product Code FL40-2505b050
  • Product Product Innoflex 40 - Blue - 12.85mm - 500gr
  • Product Color Blue
  • Product RAL 5002
  • Product Diameter 2.85mm
  • Product Weight 500gr

 39,95

Details

Innoflex: flexible, rubberlike elastomer material with different levels of stiffness. A material with a reduced carbon footprint and improved elastic performance. Shore hardness 40D (slightly softer than 45D), made from Arnitel®Eco. Arnitel®Eco is a partly bio-based Thermoplastic Copolyester Elastomer (TPC ) plastic which is derived from rapeseed oil and combines the best properties of elastomers (rubbers) and polyesters.

This material is proven to have a carbon footprint up to 50% lower than comparable co-polyesters.

The material delivers excellent adhesion in the Z-direction, meaning that the printed layers don’t detach – even with extreme deformation.

Especially suitable for printing flexible parts like miniature tires, drive belts, bracelets and parts that have to be extremely flexible and have to be bent often.

Quality

We select the best raw materials available from renowned suppliers.

Dedicated people, highest standards.

Production on our state-of-the-art computer controlled machinery guarantees a truly consistent filament, also between colors and batches.
It will perform as expected, every time.

All our products are 100% traceable to the source.

Tips & tricks

With some printers the Innoflex40 could give some problems, as this is a very flexible filament.
We do recommend a printer with a ‘pull’ system. A ‘push’ system probably will give problems with loading the filament.

The settings we are using with the Innoflex 45 and Innoflex 40;

  • the nozzle VERY close to the bed – on some printers we first do ‘normal levelling’ and then add tape
  • print temperature between 230-250 °C
  • speed between 30-40mms
  • heated bed between 0-30°C + tape
  • raise the flow to 125 –  150% (via the printer)
  • using a brim is advisable

Specifications