Moving Forward: Innofil3D will be Ultrafuse soon!
Innofil3D PLA prints fantastic and is available in 24 vibrant RAL colours and translucents. Available in 1,75mm and 2,85mm.
€ 37,95 € 31,36 ex.VAT for USA customers only!
PLA is Poly-Lactic-Acid, a biodegradable polymer with a low melting point.
It is an easy material to print with and Innofil3D PLA gives a smooth printing result.
This most used 3D printing material is available in a wide range of RAL and Innofil3D colors and translucent variants.
When properly cooled, PLA has a higher maximum printing speed, lower layer heights and sharper printed corners.
Combining this with low warping of the print makes it a popular plastic for makers, prosumers and schools.
We select the best raw materials available from renowned suppliers.
Dedicated people, highest standards.
Production on our state-of-the-art computer controlled machinery guarantees a truly consistent filament, also between colors and batches.
It will perform as expected, every time.
All our products are 100% traceable to the source.
Curious about our settings with the Innofil3d PLA?
We are printing with the following settings;
All other files are available on the 3D Printing Profiles Page.
Importing the Innofil3D material profiles into the Cura Material Manager will make our materials available to select in Cura directly. This makes it easy to start printing with our materials on Ultimaker printers and will make sure you are using the right settings for your print.
To import the material profile in the Cura interface go to
Settings > Materials > Manage Materials… Next, Press the Import button and select the downloaded profile you want to import.
Please note, We see this profile as a general purpose profile.
For additional print settings we advise to check our technical data sheets.
If you need more information or support, feel free to contact us at info@innofil3D.com
For now all Innofil3D Cura profiles for the Ultimaker printers are covered and this list will continuously be updated.
Behind the scenes, Innofil3D is also working on Cura print profiles for other printer brands.
At the same time print profiles for other slicer programs will made available once finalized.
We will give an update in our Blog & News section when new profiles are released, so you won’t miss a thing.