Ultrafuse® PA is specially developed for FFF printing based on BASF´s polyamide portfolio known as Ultramid®. With its unique mechanical properties due to its chemical structure it is suitable for
BASF‘s Ultramid® grades are molding compounds on the basis of PA6, PA66 and various co-polyamides such as PA6/66.
Ultramid® is noted for its high mechanical strength, stiffness and thermal stability.
In addition, Ultramid® offers good toughness at low temperatures.
Owing to its excellent properties, this material has become indispensable in almost all sectors of engineering for a wide range of different
components and machine elements, as a high-grade electrical insulation material and for many special applications.
Ultrafuse® PA is the translation of BASF´s Ultramid® to 3D printing space.
It is based on copolyamide 6/66 grade of intermediate viscosity.
With Ultrafuse® PA, it is possible to print semi-exible thin parts, however it is very stiff in higher thicknesses. It has a lower melting temperature than PA6 and PA66 hence it can be printed in a lower temperature as well as it has better impact strength against PA6 and PA66 which opens up a new application field to the end-users. Depending on specific requirements, the formulation can be optimized further, and special filaments can be created.
We select the best raw materials available from renowned suppliers.
Dedicated people, highest standards.
Production on our state-of-the-art computer controlled machinery guarantees a truly consistent filament, also between colors and batches.
It will perform as expected, every time.
All our products are 100% traceable to the source.
PRINT TEMP | 220 – 250 °C
PRINT SPEED | 30 – 60 mm/s
NOZZLE DIAMETER | ≥ 0.4 mm/sec
BED TEMP | 90 – 120 °C
BED ADHESION | Glass + PVA Glue Stick / Kapton tape